Hydrogenase                                                                                  Materials Of Construction, Equipments Required, Marketing and Suppliers   
                                                Primary Information Services                                                     Home. Ordering Information. Contact

                                         Information @ a Glance
  • Forged Steel Slip-on Flanges are manufactured strictly in accordance with ASTM-A105 requirements.
  • All Forged Steel Slip-on Flanges are carefully machined and all dimensions conform to ANSI B16.5 Class 150, flat face.
  • Being a welded slip-on flange, Forged Steel Flange is ideally suited for use on flange and plain end pieces, making spool pieces, and joining plain end pipe of the same diameter.
  • Most forged steel flanges correspond to the requirements of the American Standards Association and the ASTM Specification A-105.
  • The following types are manufactured and stocked. They are Welding Neck flanges, available in all pressure ratings and sizes, are butt-welded to the end of the pipe, and are usually specified when service conditions are severe and excellent workmanship necessary.
  • The inside diameter of the flange must match that of the pipe, the flange bore should be specified in ordering.
  • Slip-on flanges, also available in most pressure ratings and sizes, are a popular type due to their ease of application.
  • Each steel flange is machined to match the inside diameter of the steel pipe and inspected to verify that the raised face dimension is correct.
  • A radius that matches the radius of the polyethylene flange-fitting is machined on the inside of the raised face bore.
  • A spacer ring is placed between each of the steel flanges to allow the correct amount of compression of the polyethylene flange-fitting.
  • Flanges weld neck, socket weld, threaded, blind, slip on, lap joint and reducing type to ANSI B 16.5 from 1/2" to 24" and classes150 to 2500.
  • GORE-TEX® Series 300 gasket tape provides steel equipment with increased availability. It is easy to install and can be formed in place in any flange shape without leaving expensive material scrap.
  • The Indian industry has greatly increased its ability to produce and export stainless flanges.

Entrepreneur who want the informations on "Materials Of Construction, Equipments Required, Marketing and Suppliers " can   E-Mail to informer@eth.net, primaryinfo@gmail.com                                                                                                                                                                             

Primary Information Services
 21 Murugappan St, SwamyNagar Ext2, 
Ullagaram, Chennai - 600091, India.
 Phone: 91 44 22421080 
Email : informer@eth.net,
primaryinfo@gmail.com
Mobile numbers:9940043898, 9444008898  Fax : 91 44 22423753